Metro Standalone Crossing

Products
All Products
Metro Standalone Crossing

At a Glance

Full Specification Temporary Traffic Signal
AutoGreen and ACM Technology
Safe, simple and fast road-side deployment
Designed for Haul Routes and Standalone Ped Crossings

View product description

Features

ACM
TMdesk
AutoGreen

Make an enquiry

Visibly Safer

Metro offers contractors a safer, wireless, temporary traffic control system that provides high performance and reliability.

Metro Master is designed for use in road work environments where heightened safety is required, such as haul route crossings, high speed roads and standalone pedestrian crossings.

The Metro system makes a statement with its full height signal pole and conspicuous white bases with high visibility red band, that conform to regulatory requirements and improve public and driver perception.

The Metro Master temporary controller is designed for standalone temporary signal installations that do not require complex signalling arrangements, such as standalone pedestrian crossings, low volume junctions and simple haul route crossings.

Fast, No Nonsense Deployment

Metro is quick to deploy, with only 2 components to assemble at the roadside and no cables.

The minimal construction and wireless connectivity mean that Metro can be installed by a small team without full road closures and without the need for specialist equipment. The reliable radio-linked connectivity eliminates the need for overhead or underground cabling, so does not impact on civils work being carried out on site. The absence of overhead cables also means the units are not at risk of being pulled down by tall vehicles or inclement weather.

The Metro Master is configured roadside using an intuitive interface, which displays the battery, communications and signalling status of the connected signals.

Designed to Stand Out

Conspicuous, white bases with high visibility red band help Metro stand out, improving driver and pedestrian perception. The compact size leaves no sharp or low protruding edges that would otherwise pose a risk to partially sighted or disabled road users.

It features adjustable legs for uneven surfaces and double-entry design for easy maintenance and battery access. The base unit accommodates two controller models (e.g. Metro Signal plus Metro Master) to allow for different head configurations.

Safer, Greener, More Efficient Roadworks

Enquire now

Dedicated Master Controller

The Metro Master features diagnostics and signal/battery monitoring for all connected signals, and is normally supplied headless or as part of a standalone Pedestrian crossing system. The independent lamp and tactile monitoring ensures pedestrian safety is paramount. Metro Master features a unique Crossing mode for Haul Route crossings, and uses a configurable AGD306 FMCW radar system for high speed road support.

Read how Metro Master met London’s demand for safer traffic management

Offering the capital its first experience of the Metro temporary signal system, tbf Traffic and Traffic Group Signals (TGS) deployed Metro during works in Woodford, London.

Metro Master

FUNCTION

Master or Signal

PHASE-BASED SIGNALLING i

A common, turn-based method of signalling.

STAGE-BASED SIGNALLING i

Stage Signalling consists of a series of non-conflicting phases which run together. This allows for greater movement of vehicles. (Evo1 Pro and Metro Pro only)

ACTIVE CHANNEL MANAGEMENT i

Active Channel Management improves the reliability of temporary traffic signal communications through dynamic channel hopping and automated recovery modes. ACM is becoming a must-have feature in urban locations where radio congestion is high.

WALK WITH TRAFFIC i

Traffic and Vehicle phases are able to run at the same time (Metro Pro only).

MAXIMUM TRAFFIC PHASES

MAXIMUM PEDESTRIAN PHASES

MAXIMUM TOTAL SIGNAL HEADS

MAXIMUM VEHICLE SIGNAL HEADS

MAXIMUM PEDESTRIAN SIGNAL HEADS

CONTROLLER LINKING i

Multiple Metro controllers can be linked to provide for an increased number of signal heads/stages.

PHASE DELAY/EARLY PHASE CUT-OFF

STAGE EXTENSION

HIGH SPEED ROADS i

ToA extension with AGD306 Radar

PROGRAMMABLE ACTION BUTTON i

Features an Action button on the side of the unit that can be programmed in Signal Studio to perform a defined action.

Operating Modes

ALL-RED i

Allows the user to hold all signals at All-Red

MANUAL i

Allows the user to manually input demand

FIXED TIME

LIGHTS-OFF i

System has the ability to run with lights off - allowing the user to test the configuration or conserve battery power during part-time operation.

VEHICLE ACTUATION (VA)

SMART VA (PHASE-BASED)

AUTOGREEN

UTC i

Enables the system to connect to the local UTC/UTMC system for Highways Authority Control.

CLF PLAN i

A set of signal timing plans which control the green splits and stage change points throughout a cycle (Evo1 Pro and Metro Pro only).

Contact sales

Power
No of Batteries						Up to 6
Battery Technology						Deep Cycle AGM (12V 105Ah)
Integrated Charger						No
Runtime on Single Charge (Days)						Up to 6 weeks
Signal Dimming						Integrated dimming for night-time operation Controller auto-sleep

Physical & Security
Signal Head Options						Mast only, Traffic, Pedestrian
Signal Head Design						Mast only Double head Crossing/Hybrid Hoods & Louvres
Accessibility						Audible Sounders Radix Tactiles
Finish						White with Hi-Viz Red Band
Footprint						775mm x 625mm
Physical Security						Fully integrated design
Total Weight without Batteries (Kg)						195kg (single head)
Total Weight with 4 Batteries (Kg)						315kg (single head)
Total Weight with 6 Batteries (Kg)						375kg (single head)

Radar & Radio
Detection Technology						AGD306 FMCW Smart Radar (Traffic signal only)
Radar Power						<100mW eirp
Radar Frequency						24.150 to 24.250 GHz
System Range						5 to 300m subject to line of sight variations
Active Channel Management

System Function
Compliance						TOPAS 2502, 2537, 2538
Auto-Recovery						Advanced Recovery Protocol

Environmental
Dry Heat (BS EN 60068-2-2:2007)
Cold (BS EN 60068-2-1:2007)
Damp Cyclic (BS EN 60068-2-30:2005)
Drop (BS EN 60068-2-31:2008)
Impact (BS EN 62262:2002 & BS EN 60068-2-75:2014)
Random Vibration – Transportation (TR2130E Sect 5.1)
Random Vibration – Operational (TR2130E Sect 5.2)
Bump (BS EN 60068-2-64:2008)
Shock (BS EN 60068-2-27:2009)
Water Ingress (BS EN 60529:1992 + A2:2013)
Drop and Topple (TR2130E & BS EN 60068-2-31:2008)
Wind Tunnel Test